WARNING
● Fully install light bulbs and any parts used to secure them. Failure to do so may
result in heat damage, fire, or water entering the headlight unit. This may damage the
headlights or cause condensation to build up on the lens.
● Do not attempt to repair or disassemble the light bulbs, connectors, electric circuits or
related parts.
Doing so may result in electric shock leading to death or serious injury.
● To prevent damage or fire, make sure the bulbs are fully installed and securely locked
into each light unit.
● Check the wattage of the bulb before installing it to prevent heat damage.
Bulb locations
A
Front turn signal light (bulb type)
Replacing the front turn signal lights (bulb type)
Before replacing, check the wattage of the light bulb to be replaced.
1 Turn the bulb base counterclockwise.
2 Remove the light bulb.
9-12. Items to check before contacting a dealership
712
To Next Page
Loading...
