Changing the shift range
Selecting shift ranges in the D position
To drive using temporary shift range selection, operate the [-] paddle shift switch
with the shift position in D.
The shift range can then be selected by operating the [-] and [+] paddle shift
switches.
1 Upshift
2 Downshift
The selected shift range, from D1 to D6, will be displayed on the multi-information
display.
To return to normal D position driving, hold the [+] paddle shift switch for a certain
amount of time.
● Shift ranges and their functions
• You can choose from 6 levels of engine braking force.
• A lower shift range will provide greater engine braking force than a shift range. As a
result, the engine speed will increase.
Selecting shift ranges in the S position
To enter S mode, change the shift position to S.
The shift range can be selected by operating the [-] and [+] paddle shift switches.
1 Upshift
2 Downshift
The selected shift range, from S1 to S6, will be displayed on the multi-information
display.
The initial shift range in S position is set automatically to S4 or S5 according to
vehicle speed.
When Driving
20
To Next Page
Loading...
