Lexus RC 350 2015 - ENGINE OIL LEVEL (ENGINE NOT RUNNING); BRAKE FLUID LEVEL

ENGINE HOOD RELEASE LEVER
Usetheenginehoodreleaselevertocheckthatthelatch
operatesproperly.Ensurethattheenginehoodopensand
closessmoothly.
BRAKE FLUID LEVEL
Visuallychecktheuidlevelthroughthereservoir.Ifthe
uidlevelislow,replenishthebrakeuidreservoirwith
FMVSSNo.116DOT3,FMVSSNo.116DOT4or
SAEJ1703brakeuidandcheckforuidleaks.Brakeuid
levelshouldbeatthe“MAX”line(within0.2inches[5.0
mm]below).
NOTE:
RefertotheRepair Manualforuidspecications.
RC350shown(RCFsimilar)
RC350shown(RCFsimilar)
ENGINE OIL LEVEL (ENGINE NOT
RUNNING)
a)Removetheengineoilleveldipstickandwipeitclean. 
 Reinsertthedipstickandpullitouttochecktheoillevel. 
 Thelevelshouldbebetweenthetwomarks.
1
Low
2
Normal
   Excessive
b)Checktheoilfordirtorimpurities.
NOTE:
Iftheoillevelislow,addspeciedengineoilandcheck 
foroilleaks.
3
2
RC350/RCF
INSPECTION DETAILS - A. ENGINE COMPARTMENT