380
7-2. Steps to take in an emergency
■
When the electronic key does not work
properly
●
Make sure that the smart entry & start
system has not been deactivated in the
customization setting. If it is off, turn the
function on.
●
Check if battery-saving mode is set. If it is
set, cancel the function. (P.133)
■
Unlocking the door
Use the mechanical key (P.120) in
order to perform the following opera-
tions:
1 Insert the mechanical key while
pulling on the driver’s door handle.
2 Unlocking the door.
3 Remove the key, return the handle,
and then pull the handle again.
■
Locking the door
Except for Korea
1 Move the inside lock button to the
lock position.
2 Close the door while pulling the
door handle.
If the electronic key does not
operate properly
If communication between the
electronic key and vehicle is inter-
rupted (P.133) or the electronic
key cannot be used because the
battery is depleted, the smart entry
& start system and wireless remote
control cannot be used. In such
cases, the doors and trunk can be
opened and the engine can be
started by following the procedure
below.
■
In case of a smart entry & start system
malfunction or other key-related
problems
Take your vehicle with all the electronic
keys provided with your vehicle, includ-
ing the card key, to your Lexus dealer.
Locking and unlocking the doors
and opening the trunk
RC350-RC300_OM_General_OM24884E
To Next Page
Loading...
