416
8-2. Customization
• If the vehicle is started with any door
unlocked, the speed-detecting auto-
matic door lock will operate.
●
When the smart entry & start system is
off, the entry unlock function cannot be
customized.
●
When the doors remain closed after
unlocking the doors and the timer acti-
vated automatic door lock function acti-
vates, signals will be generated in
accordance with the operation buzzer
volume and operational signal (Emer-
gency flashers) function settings.
●
Some settings can be changed using a
switch or the Center Display. If a setting is
changed using a switch, the changed set-
ting will not be reflected on the Center
Display until the engine switch is turned
off and then to IGNITION ON mode.
RC350-RC300_OM_General_OM24884E
To Next Page
Loading...
