Lexus RC300 - Page 42

42
2-2. Connectivity settings
6 Register the Bluetooth
®
device
using your Bluetooth
®
device.
 For details about operating the
Bluetooth
®
device, see the manual
that comes with it.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on
the type of Bluetooth
®
device being
connected, a message confirming
registration may be displayed on the
Bluetooth
®
device’s screen.
Respond and operate the Blue-
tooth
®
device according to the con-
firmation message.
7 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth
®
func-
tions are not yet available.
8 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
● If a cellular phone does not operate prop-
erly after being connected, turn the cellu-
lar phone off and on and then connect it
again.
■ Registering from phone
When registering from the system is
failed, or the phone name doesn’t
appear on the registering screen, need
to connect the Bluetooth
®
phone
manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Yes” to register a phone.
4 Select “If you cannot find...”.
5 Select “Register from Phone”.
6 Register the Bluetooth
®
device
using your Bluetooth
®
device.
 For details about operating the
Bluetooth
®
device, see the manual
that comes with it.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible