Lexus RC300 - Map Screen Operation

82
3-1. Basic operation
1 Press the “MAP” button on the
Remote Touch.
2 Check that the current position
map is displayed.
 To correct the current position man-
ually: P.118
● While driving, the current position mark
is fixed on the screen and the map moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the battery disconnection, or on a
new vehicle, the current position may not
be correct. As soon as the navigation sys-
tem receives signals from the GPS, the
correct current position is displayed.
1 Select or to change the
scale of the map screen.
● The scale indicator bar appears at the
bottom of the screen.
● Select and hold or to continue
changing the scale of the map screen.
● The scale of the map screen can also be
changed by selecting the scale bar
directly. This function is not available
while driving.
● The scale of the map screen can be
changed on the touchpad of the Remote
Touch with your finger.
Pinch out on the touchpad to zoom in and
pinch in to zoom out. (P.31)
● In areas where a micro city map is avail-
able, will change to when the
map screen is set to the smallest scale.
Map screen operation
Current position display
Map scale