109
3-3. Route guidance
3
Navigation system
When more than 1 destination has
been set, the arrival order of the desti-
nations can be changed.
1 Select on the map screen.
2 Select “Reorder”.
3 Select the desired destination and
select “Move Up” or “Move Down”
to change the arrival order. Then
select “OK”.
1 Select on the map screen.
2 Select “Route Type”.
3 Select the desired route type.
The entire route from the starting
point to the destination is displayed.
(P.101)
During driving, the route guidance
starts after selecting the desired
route type.
The conditions to determine the route
can be selected from various choices
such as freeways, toll roads, ferries, etc.
1 Select on the map screen.
2 Select “Preference”.
3 Select the desired route prefer-
ences and select “OK”.
● Even if the “Avoid Freeways” route prefer-
ence is turned off, the route may not be
able to avoid freeways in some cases.
● If the calculated route includes a trip by
ferry, the route guidance shows a sea
route. After traveling by ferry, the current
position may be incorrect. Upon recep-
tion of GPS signals, it is automatically
corrected.
Reordering destinations
Selecting route type
Setting route preferences
To Next Page
Loading...
