Lexus RC350 - Page 115

115
3-4. Setup
3
Navigation system
1 Press the button on the Remote
Touch, and then select “Add New”.
2 Select “Recent Destina-
tions”(P.94) or “Current Loca-
tion” to search for the location.
3 Select “+” or “-” to change the size
of the area to be avoided and select
“OK”.
4 Select “OK” when the area to avoid
screen appears.
● If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the area
to be avoided may be shown.
● Up to 10 locations can be registered as
points/areas to avoid.
The name, location and/or area size of
a registered area can be edited.
1 Select the desired area.
2 Select the desired item to be
edited.
Select to edit the name of the area
to avoid.
Select to edit area location.
Select to edit area size.
Select to set the area to avoid func-
tion on/off.
Select to set display of the area to
avoid name on/off.
Select to delete areas to avoid.
3 Select “OK”.
Registering areas to avoid
Editing areas to avoid
A
B
C
D
E
F