186
5-1. Voice command system operation
settings screen. (P.71)
● Some voice guidance can be canceled by
setting voice prompts to off. Use this set-
ting when it is desirable to say a com-
mand immediately after pressing the talk
switch and hearing a beep.
To increase voice recognition perfor-
mance, use the “Tutorials” and “Voice
Training” functions on the “Getting
Started with Voice” screen. These
functions are only available when the
vehicle is not moving.
The “Tutorials” and “Voice Training”
functions can also be started on the
voice settings screen. (P.71)
1 Press the talk switch.
2 Select the desired item to be set.
Select to display the voice com-
mand tutorials.
Select to train the voice command
system.
The user will be asked to say 10 sample
phrases. This will help the voice command
system adapt to the user’s accent.
Select to prevent the screen from
being displayed again.
Select to proceed to the voice
command screen.
*
: 10.3-inch display model with DCM. This
function is not made available in some
countries or areas.
Text messages can be written using the
dictation function.
To use the dictation function, a sub-
scription to the Lexus Enform is neces-
sary. Contact your Lexus dealer for
details.
1 Select .
2 Speak to the system.
Words recognized through your
speech will be displayed. To confirm
the entered text, select “OK”.
● A keyboard screen will not be displayed
when the vehicle is being driven.
● Text message reply with the dictation
function may not be available depending
on the type of cellular phone.
Increasing the voice recognition
performance
Dictation function (English only)
*
To Next Page
Loading...
