Lexus RC350 - Wi-Fi Hotspot

54
2-2. Connectivity settings
1 Enable the Wi-Fi
®
Hotspot func-
tion. (P.55)
2 Disable the “Hide Access Point”
function. (P.55)
3 Search for the vehicle access point
using the device you wish to con-
nect.
 For details about operating the
device, refer to the documentation
which came with it.
4 Operate the device to connect it to
the vehicle access point.
 To check the vehicle access point
password, check “Password”.
(P.55)
● Hints for connecting to the vehicle via
Wi-Fi
®
can be displayed. (P.55)
1 Enable the Wi-Fi
®
Hotspot func-
tion. (P.55)
2 Enable the “Hide Access Point”
function. (P.55)
3 Enter the access point name (SSID)
into the device you wish to connect
and connect it.
 To check the vehicle access point
password, check “Password”.
(P.55)
 The security settings on the device
must be the same as that displayed
for “Security”. (P.55)
 For details about operating the
device, refer to the documentation
which came with it.
Wi-Fi
®
Hotspot
By connecting a device to the vehi-
cle via Wi-Fi
®
, it can access the
internet through the DCM (Data
Communication Module).
 To use this function, a Wi-Fi
®
Hotspot service subscription
from AT&T is required. Connect
your device to the in-vehicle
access point (see instructions
below), or contact your Lexus
dealer for details.
 This function is not made available
in some countries or areas.
Connecting a device to the
in-vehicle access point
Searching for and connecting a
device to the vehicle access point
Connecting a device to the
in-vehicle access point using the
access point name (SSID)