Lexus RC350 - Page 95

95
3-2. Destination search
3
Navigation system
1 Display the destination search
screen by either operation:
 “MAP” button 
 “MENU” button  “Destination”
2 Select “Emergency”.
3 Select the desired emergency cat-
egory.
4 Select the desired destination.
● The navigation system does not guide in
areas where route guidance is unavail-
able. (P.124)
To use this function, it is necessary to
have contact data which had been
transferred to the navigation system
from a registered Bluetooth
®
phone.
(P.220)
1 Display the destination search
screen by either operation:
 “MAP” button 
 “MENU” button  “Destination”
2 Select “Contacts”.
3 Select the desired contact.
4 Select “Addresses”.
5 Select the desired address.
6 Follow the steps in “Searching by
keyword” from step 4. (P.93)
● This function may not be available
depending on the type of Bluetooth
®
phone.
1 Display the destination search
screen by either operation:
 “MAP” button 
 “MENU” button  “Destination”
2 Select “Address”.
 If a state (province) has not been
selected yet, “State/Province”
screen is displayed. (P.93)
3 Enter a house number and select
“Search”.
“Change State/Province”: Select to
change the search area. (P.93)
4 Enter a street name and select
“Search”.
5 Select the desired street name.
6 Enter a city name and select
“Search”.
7 Select the desired city name.
 If multiple locations with the same
address exist, the address list screen
will be displayed. Select the desired
address.
● A street name can be searched using
only the body part of its name.
For example: S WESTERN AVE
• A search can be performed by entering
“S WESTERN AVE”, “WESTERN AVE”
or “WESTERN”.
Searching by emergency
Searching by contact
Searching by address