97
3-2. Destination search
3
Navigation system
1 Press the button on the Remote
Touch.
2 Select “Enter a city name”.
3 Enter a city name and select
“Search”.
“Any City”: Select to cancel the city setting.
4 Select the desired city name.
5 Select the desired POI.
1 Press the button on the Remote
Touch.
2 Select “Change POI category”.
3 Select the desired category.
If there is more than 1 result for the
selected category, a detailed list will
be displayed.
“List All Categories”: Select to display all
POI categories.
4 Select the desired POI.
1 Select “Category”.
2 Select the desired search point.
Select to search for POIs near your
current position.
Select to search for POIs along the
set route.
Select to search for POIs near a
specific city center. (P.98)
Select to search for POIs near a
destination. When more than 1 des-
tination has been set, a list will be
displayed on the screen. Select the
desired destination.
3 Select the desired POI category.
Select “Other POIs” to select other
than default POI categories. The
following button can be displayed.
“List All Categories”: Select to display all
POI categories.
“Favorite POI Categories”: Select to use
the 6 POIs that have been previously set.
(P.117)
4 Select the desired POI.
● The names of POIs located within
approximately 200 miles (320 km) from
the selected search point can be dis-
played. They are displayed up to 200
names.
Selecting a city to search
Selecting from the categories
Searching by category
To Next Page
Loading...
