110
2. Instrument cluster
RC350_RC300_RC200t_RC F_U (OM24671U)
■ Language
Select to change the language on the display.
■ Units
Select to change the unit of measure for fuel consumption.
■ Maintenance system (if equipped)
Select to reset the maintenance data after the required maintenance is per-
formed. (
P. 473)
■ Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
■ switch settings (except F SPORT models)
Displays a procedure to register a desired screen to .
You can register 1 screen as a shortcut, which can be displayed by pressing
. (
P. 107)
■ Drive information 1/Drive information 2
Select to select up to 2 items that will be displayed on the “Drive Info 1” screen
and “Drive Info 2” screen respectively. (
P. 108)
■ Pop-up display
Select to set the following pop-up displays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navigation system-linked system
(if equipped)
• Incoming call display of the hands-free phone system
• Windshield wiper switch operation display (if equipped)
• Headlight switch operation display (if equipped)
• Dynamic radar cruise control operation display (if equipped)
• Instrument panel brightness adjustment display
• Main meter switch operation display (F SPORT models)
■ Accent color (except F SPORT models)
Select to change the accent colors on the screen, such as the cursor color.
■ Needle (F SPORT models)
Select to change the needle color for the tachometer.
Settings display
To Next Page
Loading...
