Lexus RX330 2005 - Vehicle−To−Vehicle Distance Control Mode Failure Warning

STARTING AND DRIVING
430
CAUTION
To ensure that dynamic laser cruise control will function
properly while driving, observe the following:
 Always keep the laser radar sensor glass clean.
When cleaning, use a soft cloth and be careful not to
damage the sensor.
 Avoid strong impacts around the laser radar sensor.
An incorrect laser radar sensor alignment will result
in system malfunction. A special device is required
to adjust the laser radar sensor alignment. Be sure
to have the sensor adjusted by your Lexus dealer.
 Do not affix a sticker (including a transparent sticker)
or attach an accessory around the laser radar sensor.
(l) Vehicle−to−vehicle distance control mode failure
warning

1
Warning code
2
“CRUISE” indicator light
3
Master warning light
If there is trouble somewhere in the dynamic laser cruise
control while the vehicle−to−vehicle distance control mode is
on, the master warning light comes on and the alarm sounds,
and one of the warning codes “E1”, “E2” or “E3” will appear on
the display. Dynamic laser cruise control is automatically
cancelled.
If “E3” appears on the display, the “CRUISE” indicator light in
the instrument cluster also flashes.