143
3-4. Adjusting the steering wheel and mirrors
3
Before driving
*
: If equipped
Camera indicator
Indicates that the camera is operating nor-
mally.
Icon display area
Displays icons, adjusting gauge, etc.
(P.145)
Select/adjust button
Press to change the setting of the item you
want to adjust.
Menu button
Press to display the icon display area and
select the item you want to adjust.
Lever
Operate to change between digital mirror
mode and optical mirror mode.
Digital mirror anti-glare function
indicator
Displayed in digital mirror mode when the
anti-glare function of the digital mirror is
enabled. (P.145)
Operate the lever to change between
digital mirror mode and optical mirror
mode.
Digital Rear-view Mirror
*
The Digital Rear-view Mirror is a
system that uses the camera on the
rear of the vehicle and displays its
image on the display of the Digital
Rear-view Mirror.
The Digital Rear-view Mirror can
be changed between optical mirror
mode and digital mirror mode by
operating the lever.
The Digital Rear-view Mirror allows
the driver to see the rear view
despite obstructions, such as the
head restraints or luggage, ensur-
ing rear visibility. Also, the rear
seats are not displayed and privacy
of the passengers is enhanced.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ Before using the Digital Rearview
Mirror
● Make sure to adjust the mirror before
driving. (P.144)
• Change to optical mirror mode and
adjust the position of the Digital
Rear-view Mirror so that the area
behind your vehicle can be viewed
properly.
• Change to digital mirror mode and
adjust the display settings.
● As the range of the image displayed by
the Digital Rear-view Mirror is differ-
ent from that of the optical mirror,
make sure to check this difference
before driving.
System components
Changing modes
A
B
C
D
E
F
To Next Page
Loading...
