29
RX500h/RX350h_QG_U
To enter S mode, shift the shift position to S. Gears can be selected by operating the paddle
shift switches, allowing you to drive in the gear of your choosing. The shift range can then be
selected by operating the “-” and “+” paddle shift switches.
1
Upshifting
2
Downshifting
The selected shift range, from S1 to S6, will
be displayed on the meter.
The initial shift range in S mode is automati-
cally set to S4.
■
Shift ranges and their functions
● You can choose from 6 levels of accelerating force and engine braking force.
● A lower shift range will provide greater accelerating force and engine braking force than
a higher shift range, and the engine revolutions will also increase.
Selecting gears in the S position
To Next Page
Loading...
