32
RX500h/RX350h_QG_U
While the vehicle is stopped, pull and hold the parking brake switch until a buzzer sounds
and a message is shown on the multi-information display.
When the automatic mode is turned on, the parking brake operates as follows.
● When the shift position is shifted from P, the parking brake will be released, and the park-
ing brake indicator light will turn off.
● When the shift position is shifted to P, the parking brake will be set, and the parking brake
indicator light will turn on.
Operate the shift lever and P position switch with the vehicle stopped and the brake pedal
depressed.
The auto function may not operate if the shift lever is moved extremely quickly. In this situa-
tion, apply the parking brake manually.
While the vehicle is stopped and depressing the brake pedal, press and hold the parking
brake switch until a buzzer sounds and a message is shown on the multi-information display.
Turning the automatic mode on
Turning the automatic mode off
To Next Page
Loading...
