42
RX500h/RX350h_QG_U
1
Press the Automatic High Beam
switch.
2
Turn the headlight switch to the or
position.
When the headlight switch lever is in
the low beam position, the AHB system
will be enabled and the AHB indicator
will illuminate.
AHB (Automatic High Beam) (if equipped)
The Automatic High Beam uses a front camera located on the upper portion of the wind-
shield to detect the brightness of the lights of vehicles ahead, streetlights, etc., and auto-
matically changes the head lights between the high beams and low beams.
Using the Automatic High Beam system
To Next Page
Loading...
