Lexus RZ300e 2024 - Parking the Vehicle

23
RZ450e_RZ300e_QG_U
1 Depress the brake pedal to stop the vehicle completely.
2 If the parking brake is released, set the parking brake.
3 Shift the shift position to P.
Check that the shift position indicator shows P and the parking brake indicator is illumi-
nated.
4 Press the power switch to stop the EV system.
5 Slowly release the brake pedal.
6 Lock the door, making sure that you have the electronic key on your person.
If parking on a hill, block the wheels as needed.
The parking brake can be applied or released automatically (automatic mode) or manually
(manual mode). In automatic mode, the parking brake is applied or released automatically
according to the operation of the rotary shifter. Also, in automatic mode the parking brake
can be applied or released manually.
■ Turning the automatic mode on
While the vehicle is stopped, pull and hold the parking brake switch until a buzzer sounds
and a message is shown on the multi-information display.
When the automatic mode is turned on, the parking brake operates as follows.
● When the shift position is shifted from P, the parking brake will be released, and the park-
ing brake indicator light will turn off.
● When the shift position is shifted to P, the parking brake will be set, and the parking brake
indicator light will turn on.
Operate the dial shift and P position switch with the vehicle stopped and the brake pedal
depressed.
The auto function may not operate if the rotary shifter is moved extremely quickly. In this sit-
uation, apply the parking brake manually.
■ Turning the automatic mode off
While the vehicle is stopped and depressing the brake pedal, press and hold the parking
brake switch until a buzzer sounds and a message is shown on the multi-information display.
Parking the vehicle
Parking brake operation
Automatic applying/releasing of the parking brake (auto mode)