30
RZ450e_RZ300e_QG_U
1
Press the Adaptive High-beam System
switch.
2
Turn the headlight switch to the or
position.
When the headlight switch lever is in
the low beam position, the AHS will be
enabled and the AHS indicator will illu-
minate.
AHS (Adaptive High-beam System) (if equipped)
The Adaptive High-beam System uses a front camera located on the upper portion of the
windshield to detect the brightness of the lights of vehicles ahead, streetlights, etc., and
automatically controls the light distribution of the headlights.
Using the Adaptive High-beam System
To Next Page
Loading...
