43
RZ450e_RZ300e_QG_U
6
Check that the displayed PIN code matches the PIN code displayed on the
Bluetooth
®
device, and then touch “OK”.
● Some Bluetooth
®
devices may need to be operated to complete registration.
● When an HFP supported Bluetooth
®
device is registered, that device is automati-
cally set as the primary device if the driver does not have a primary device set.
● The Apple CarPlay or Android Auto settings may be displayed. The Apple CarPlay
or Android Auto screen will be displayed if the use of either is enabled.
● A message indicating that connection is complete is displayed, and the name of the
registered Bluetooth
®
device is displayed in the submenu.
● If an operation failed screen is displayed, follow the operation instructions on the
screen.
■
Registering from a Bluetooth
®
device
If the Bluetooth
®
device cannot be found by searching with the multimedia system, register
by searching for the multimedia system from the Bluetooth
®
device.
1
Touch “ ” from the main menu.
2
Touch “Bluetooth & Devices” on the submenu.
If no device is registered, proceed to Procedure 4.
3
Touch “Add another device”.
While a device is connected to the multimedia system, the confirmation screen for dis-
connecting the device may be displayed. Disconnect the device to perform registra-
tion.
4
Register the multimedia system from
the Bluetooth
®
device to be used.
● Perform the operation according to
the operating procedure of the
Bluetooth
®
device.
● Be sure to display this Bluetooth
®
connection screen before perform-
ing registration on the Bluetooth
®
device.
To Next Page
Loading...
