44
RZ450e_RZ300e_QG_U
5
Check that the displayed PIN code matches the PIN code displayed on the
Bluetooth
®
device, and then touch “OK”.
● Some Bluetooth
®
devices may need to be operated to complete registration.
● When an HFP supported Bluetooth
®
device is registered, that device is automati-
cally set as the primary device if the driver does not have a primary device set.
● The Apple CarPlay or Android Auto settings may be displayed. The Apple CarPlay
or Android Auto screen will be displayed if the use of either is enabled.
● A message indicating that connection is complete is displayed, and the name of the
registered Bluetooth
®
device is displayed in the submenu.
● If an operation failed screen is displayed, follow the operation instructions on the
screen.
■
Operating with the steering switches (Type A)
Some hands-free call functions can be operated from the steering switches, such as receiv-
ing or making calls. The steering switch functions change depending on the status of the
multimedia system.
● Operate the switches as necessary.
“+” switch
Increases the ringtone volume or receiver
volume.
Press and hold to adjust continuously.
“-” switch
Decreases the ringtone volume or receiver
volume.
Press and hold to adjust continuously.
“” switch
Calls can be made using Intelligent Assistant.
To end Intelligent Assistant, press and hold the talk switch.
“” switch
• While a call cannot be made, displays call history screen or phone menu.
• Phone calls can be made when “ ” is displayed on the phone screen.
• While making a call or during a call, ends the call.
• While receiving a call or during call waiting, answers the call.
To Next Page
Loading...
