73
RZ450e_RZ300e_QG_U
1
Unlock the doors to unlock the
charging connector.
The charging connector will be
unlocked and the charging inlet light
will illuminate when the doors are
unlocked.
2
Pull the charging connector towards you
while pressing the latch release button.
If the latch release button is pressed
during charging (while the charging
indicator is illuminated), charging will
be interrupted.
3
Attach the charging connector cap.
4
Close the charging port lid.
Lock the doors to lock the charging
port lid.
5
Remove the plug from the socket when
the charging equipment will not be
used for a prolonged period of time.
Hold the body of the plug when removing.
Make sure to put the cable away
immediately after disconnecting.
When leaving the plug inserted, inspect
the plug and connector once a month
to check if dirt or dust has accumulated.
After charging
To Next Page
Loading...
