130
1-8. Obtaining the correct driving posture
*
: This is a function for the optical mirror
mode, however, the setting can also be
changed while using the digital mirror
mode.
■ Display settings (digital mirror
mode)
The icons will disappear if a button is
not operated for approximately 5
seconds or more.
If the displayed image is adjusted, it
may appear distorted. This is not a
malfunction.
If the brightness of the Digital
Rear-view Mirror is set too high, it
may cause eye strain. Adjust the
Digital Rear-view Mirror to an
appropriate brightness. If your eyes
become tired, change to optical
mirror mode.
The brightness of the Digital
Rear-view Mirror will change auto-
matically according to the bright-
ness of the area in front of your
vehicle.
The anti-glare function of the digital
mirror is operational only when the
surrounding area of the vehicle is
dark enough. Depending on the
brightness conditions of the sur-
rounding area, the brightness of the
displayed image on the digital mir-
ror may not be reduced, not
enabling to reduce the headlight
glare of the following vehicle.
Select to enable/dis-
able the automatic
anti-glare function.
*
Responding to the
brightness of the
headlights of vehi-
cles behind, the
reflected light is
automatically
adjusted.
The automatic
anti-glare function is
enabled each time
the power switch is
changed to ON.
The anti-glare func-
tion of the digital
mirror can be
enabled/disabled.
When enabled,
image on the digital
mirror at nighttime
will be displayed at a
reduced brightness
level, reducing the
headlight glare of
the following vehi-
cle.
Select to display
HomeLink
®
Train-
ing Tutorial to assist
customers to train
their Garage Door
Opener System.
Select to change the
language of the
HomeLink
®
Train-
ing Tutorial.
Icons Settings
Precautions when adjusting the
Digital Rear-view Mirror
To Next Page
Loading...
