300
6-2. Using the safe driving support functions
Depending on the condition of the vehicle
and road surface, the break suggestion
function may not operate.
The LDA system can be
enabled/disabled through a custom-
ize setting. (P.590)
The LDA setting can be changed on
the customize settings. (P.590)
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
Changing LDA settings
WARNING
■ Situations in which the system may
not operate properly
In the following situations, the system
may not operate properly and the vehicle
may depart from its lane. Do not overly
rely on these functions. The driver is
solely responsible for paying attention to
their surroundings and operating the
steering wheel as necessary to ensure
safety.
● When the boundary between the
asphalt and grass, soil, etc., or struc-
tures, such as a curb, guardrail, etc. is
not clear or straight
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the lane may not be
detected : P.274
● Situations in which the sensors may not
operate properly: P.273
● Situations in which some or all of the
functions of the system cannot oper-
ate: P.275
● When it is necessary to disable the sys-
tem: P.269
Displays and system operation
Indicator Lane display Steering icon Situation
Not illumi-
nated
Not illumi-
nated
Not illumi-
nated
System disabled
White
Grey
Not illumi-
nated
Lane lines are not detected by the system
To Next Page
Loading...
