319
6-2. Using the safe driving support functions
6
Driving support system
Vehicles with a head-up display
1 Press the cancel switch or driving assist switch to cancel control.
Control will also be canceled if the brake pedal is depressed.
(If the vehicle has been stopped by system control, depressing the brake pedal will not can-
cel control.)
2 Press the “RES” switch to resume control.
Each time the switch is pressed, the vehicle-to-vehicle distance setting will change
as follows:
If a preceding vehicle is detected, the preceding vehicle mark will be displayed.
Vehicles without a head-up display
Changing the vehicle-to-vehicle distance
To Next Page
Loading...
