331
6-2. Using the safe driving support functions
6
Driving support system
*
:If equipped
Traffic Jam Assist is a system which,
through confirmation of the conditions
by the driver, provides lane keeping,
accelerating/decelerating, stopping,
and starting off support on some high-
ways and expressways. Also, in an
emergency, the system can decelerate
and stop, to help avoid a collision or
help reduce the impact of a collision.
Sensors which detect the surround-
ing conditions (P.270)
Sensors which detect the driver
condition (P.270)
■ Situations in which some or all of the
functions of the system cannot operate
P.275
■ Changes in brake operation sound and
pedal response
P.275
■ Situations in which the driver monitor
may not operate properly
P.275
P.336
P.314
The Traffic Jam Assist function, through
confirmation of the conditions by the
driver, provides lane keeping, acceler-
ating/decelerating and stopping sup-
port on some highways and
expressways.
This function is operable when all of the
operation conditions are met.
When this function is operating, it is
possible to take your hands off of the
steering wheel. (P.333)
Before using the Traffic Jam Assist function,
familiarize yourself with the content of the
dynamic radar cruise control and the LTA
(Lane Tracing Assist).
Make sure that the driver steers the vehicle
when entering a service area/parking area
or toll gate, or when changing lanes.
When the operation of Traffic Jam
Assist is started, the following message
will be displayed:
“Allow Driver Monitor Camera
Recording?”
When recording is approved, the system
records images of the area around the
driver in certain crash or near crash-like
situations, such as an SRS airbag being
deployed or the vehicle hitting an object on
the road. (P.612)
Traffic Jam Assist
*
Traffic Jam Assist
Function Outline
Sensors that support the Traffic
Jam Assist
Emergency Driving Stop System
Extended resume time of
Dynamic radar cruise control
Traffic Jam Assist Function
Driver monitor camera recording
To Next Page
Loading...
