50
1-3. Charging with the EV system
P.47
1
Prepare the AC charging cable.
2
Insert the plug of the AC charging
cable into the socket of the external
power source.
Make sure to hold the body of the plug and
insert it firmly into the socket.
If there is a switch that can switch the
power supply to the socket, turn it on.
Check that the power indicator on the
CCID (Charging Circuit Interrupting
Device) is illuminated.
(If it is not illuminated, refer to P.541)
In order to reduce the load on the socket
and plug, when inserting the plug, use a
string, etc., to hang the CCID (Charging
Circuit Interrupting Device) on a hook or
equivalent.
3 Open the charging port lid.
(P.32)
The charging inlet light will illuminate.
4 Remove the charging connector
cap and secure it to the cable.
NOTICE
■ AC charging inlet
Do not disassemble, repair or modify the
AC charging inlet. When the AC
charging inlet needs to be repaired, con-
sult your Lexus dealer.
Charging precautions
When charging
To Next Page
Loading...
