EasyManua.ls Logo

Lexus RZ450E 2023 - If DC Charging Cannot be Performed Normally

Lexus RZ450E 2023
640 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
537
9-6. If the EV system cannot be used normally
9
When trouble arises
If DC charging cannot be performed normally
DC charging does not start
Cause Remedy
The DC charging connector is not properly
connected to the vehicle.
Check the connection status of the DC
charging connector and be sure that it is
locked.
If the DC charging does not start, even
though the DC charging connector is
securely connected, there may be a mal-
function with the DC charger or charging
system.
If there is a malfunction with the DC char-
ger, contact the charging station manager.
If there is not a malfunction with the DC
charger, there may be a malfunction in the
system. Contact your Lexus dealer.
The DC charging connector is not securely
locked.
Error is detected by the DC charger or vehi-
cle’s system check.
There may be a malfunction with the DC
charger or charging system.
If there is a malfunction with the DC char-
ger, contact the facility manager.
If there is not a malfunction with the DC
charger, there may be a malfunction in the
system. Contact your Lexus dealer.
If the EV system cannot be started, con-
tact your Lexus dealer.
The DC charger power goes off.
Contact the charging station manager and
check the power status.
Traction battery is already fully charged
When the traction battery is fully charged,
DC charging cannot be performed.
The remaining charge of the traction battery
exceeds the set upper limit of the charge
capacity
Change to a higher upper limit setting than
the current remaining charge capacity and
perform charging again. (P.52)

Table of Contents

Related product manuals