56
RZ450e_RZ300e_QG_U
■
Adjusting the temperature
Turn temperature control dial clockwise to increases the temperature and turn the dial
counterclockwise to decreases the temperature.
When the indicator on the “Sync” switch is illuminated, the temperature setting for the front
passenger’s side will match the setting for the driver’s side.
When the indicator on the “Sync” switch is off, turning the “Sync” switch on will illuminate the
“Sync” switch indicator and the temperature setting for the front passenger’s side will
become the same as that for the driver’s side.
When the front passenger’s side temperature adjustment switch is operated, the indicator
on the “Sync” switch will turn off and the temperature setting for the front passenger’s side
will be able to be adjusted.
When the indicator on the “A/C” switch is off, the blower and heater can be used.
■
Setting the fan speed
To increase the fan speed, select the “+” fan speed adjustment switch or slide the icon of the
fan speed adjustment switch right. To decrease the fan speed, select the “-” fan speed adjust-
ment switch or slide the icon of the fan speed adjustment switch left.
Select the “Off” switch to turn the fan off.
The fan can also be stopped by touching and holding the “-” fan speed adjustment switch or
sliding the icon of the fan speed adjustment switch to the leftmost position and holding it.
■
Changing the air flow mode
Select the airflow mode control switch.
The airflow mode changes each time the switch is selected.
The air outlets and air volume changes according to the selected air flow mode.
: Air flows to the upper body
: Air flows to the upper body and feet
: Air flows to the feet
: Air flows to the feet and the windshield defogger operates
To Next Page
Loading...
