84
RZ450e_RZ300e_QG_U
● To recall the previous door operation status, press and release either HomeLink
®
but-
tons and or and (vehicles with auto anti-glare inside rear view mirror),
and or and (vehicles with Digital Rearview Mirror), simultaneously.
The last recorded status will be displayed for 3 seconds.
When the following procedure is performed, buttons which already have devices registered
to them can be overwritten:
1
Press and hold the desired HomeLink
®
button.
2
When the HomeLink
®
indicator starts flashing orange, release the HomeLink
®
button.
3
Press and release the HomeLink
®
button you want to program and check that the
HomeLink
®
indicator light flashes orange.
It takes 20 seconds for the HomeLink
®
indicator to start flashing.
When selling your vehicle, be sure to erase the registered codes from the HomeLink
®
memory.
Vehicles with auto anti-glare inside rear view mirror
Vehicles with Digital Rearview Mirror
Press and hold the 2 outer HomeLink
®
buttons for 10 seconds. Check that the HomeLink
®
indicator light changes from continuously lit in orange to rapidly flashing in green.
All codes registered to memory will be erased.
Reprogram the HomeLink
®
Erase the entire HomeLink
®
memory
To Next Page
Loading...
