197
3-5. Other interior features
3
Interior features
■ Programming an entrance gate (for U.S.A. owners)/Programming
all devices in the Canadian market
Place the remote control for the device 1 to 3 in. (25 to 75 mm)
away from the HomeLink
control buttons.
Keep the indicator light on the HomeLink
in view while pro-
gramming.
Press and hold the selected HomeLink
button.
Repeatedly press and release (cycle) the device remote control
button every two seconds until step is completed.
When the indicator light on the HomeLink
compatible trans-
ceiver start to flash rapidly, release the buttons.
Press the newly programmed HomeLink
button to see if it oper-
ates the device.
Repeat the steps for each remaining HomeLink
button to pro-
gram another device.
■ Programming other devices
To program other devices such as home security systems, home door
locks or lighting, contact your authorized Lexus dealer for assistance.
■ Reprogramming a button
The individual HomeLink
buttons cannot be erased but can be repro-
grammed. To reprogram a button, follow the “Basic programming”
instructions.
4
To Next Page
Loading...
