134
3-2. Using the audio system
Scanning radio stations
■ Scanning the preset radio stations
Press and hold the until a beep is heard.
Preset stations will be played for a few seconds each.
Push once more to select the desired station.
■ Scanning all radio stations within range
Push .
Received stations will be played for a few seconds each.
Push once more to select the desired station.
■ When the battery is disconnected
Stations saved in the memory presets are deleted.
■ Reception sensitivity
● Maintaining perfect radio reception at all times is difficult due to the continually
changing position of the antenna, differences in signal strength and surrounding
objects, such as trains, transmitters, etc.
● The factory installed radio antenna is mounted inside the windshield. To main-
tain a high level of radio reception, do not attach metallic window tint or other
metallic objects to the antenna wire mounted inside the windshield.
■ When the system can show the station name
RDS appears on the display. The indication changes each time you push the .
● Band
● Station name
● Radio text
■ Power antenna
The power antenna automatically extends when the radio mode or RDS is on and
retracts when it is off.
To Next Page
Loading...
