171
3-5. Other interior features
3
Interior features
Simultaneously press and hold the
transmitter button along with one
of the HomeLink
buttons.
When the indicator light on the
HomeLink
changes from a slow
to a rapid flash after 20 seconds,
you can release both buttons.
Test the operation of the HomeLink
by pressing the newly pro-
grammed button.
If programming a garage door opener, check to see if the garage door
opens and closes. If the garage door does not operate, see if your
garage transmitter is of the “Rolling Code” type. Press and hold the pro-
grammed HomeLink
button. The garage door has the rolling code
feature if the indicator light (on the HomeLink
) flashes rapidly and
then remains lit after 2 seconds. If your transmitter is the “Rolling Code”
type, proceed to the heading “Programming a rolling code system”.
Repeat the steps for each remaining HomeLink
button to pro-
gram another device.
To Next Page
Loading...
