Lexus SC430 - Page 39

Topic 5
Driving Comfort
39
SC430_Quick_OM24602U
■ Programming HomeLink
®
Hold your hand-held transmitter within 3
inches of the HomeLink
®
buttons.
Press and hold down the desired HomeLink
®
button.
For U.S.A. owners:
While pressing the HomeLink
®
button,
press and hold down the button on the
hand-held transmitter until the indicator
light changes from a slow to a rapid flash.
For Canadian owners:
While pressing the HomeLink
®
button,
repeatedly press and release (cycle) the
button on the hand-held transmitter every
2 seconds until the indicator light changes
from a slow to a rapid flash.
If your garage door is of the rolling code type:
Press the learn button on the motor-head unit
in your garage.
Press and hold the vehicle’s programmed
HomeLink
®
button for 2 seconds and release
it. Repeat this step once again. The garage
door may open.
If the door does not open, press and
release the same button once again.
■ Programming other devices
For U.S.A. owners:
To program an entry gate, see the Owner’s Manual.
To program other devices, contact your Lexus dealer.
For Canadian owners:
To program all devices, follow the same procedure as for garage door programming.
■ Operating HomeLink
®
Press the appropriate HomeLink
®
button. The
indicator light should come on.
1
2
3
4