LEYBOLD IONIVAC Series - Removing and Installing the Electronics Unit

Installation
14
GA09420_002_C0 – (2016-10) –
 Leybold
3.1.2 Removing and Installing the Electronics Unit
Required tool
• Allen key, size 2.5 mm
Removing the electronics unit
 Unscrew the hexagon socket set screw (1) on the side of the electronics
unit (2).
2
1
 Remove the electronics unit without twisting it.
Removal of the electronics unit is completed.
Installing the electronics unit
 Place the electronics unit on the sensor (3) (be careful to correctly align the
pins and notch (4)).
4
3