Operation
44
GA10218_002_C0 - 10/2016 - © Leybold GmbH
3.5 Interfaces
Under Main menu > Settings > Interfaces the parameters for the interface can be
set.
Softkey 2: Location of control
The location of control for the leak detector can be defined
Softkey 3: Define recorder output
Customer defined selection for the recorder output
Softkey 4: RS232
Selection for the RS232
Softkey 5: Define PLC outputs (Control, digital out)
Customer defined selection for PLC outputs
Softkey 6: Define PLC inputs (Control 2, Digital in)
Customer defined selection for PLC inputs
Softkey 7: Scaling recorder outputs
Selection for the scaling of the recorder output
Softkey 8: PLC sample rate
Selection of the PLC sample rate
To Next Page
Loading...
