LEYBOLD TRIVAC D 16 B-DOT - 1.4 Technical Data

13GA01208_002_C0 - 11/2016 - © Leybold
1.4 Technical Data
TRIVAC-B-DOT D 16 B-DOT D 25 B-DOT D 40 B-DOT
Nominal pumping speed
1)
m
3
· h
-1
18.9 29.5 46
Pumping speed
1)
m
3
· h
-1
16.5 25.7 40
Ultimate partial pressure without gas ballast
1)
mbar 10
-4
10
-4
10
-4
Ultimate total pressure without gas ballast
1)
mbar < 6 · 10
-1
< 6 · 10
-1
< 6 · 10
-1
Ultimate total pressure with gas ballast
1)
mbar < 9 · 10
-1
< 9 · 10
-1
< 9 · 10
-1
Water vapour tolerance
1)
mbar 25 25 40
Water vapour capacity g · h
-1
305 476 1184
OIl filling, min./max. l 0.45 / 1.0 0.6 / 1.4 1.7 / 2.6
Noise level to DIN 45 635, dB (A) 54 / 56 54 / 56 57 / 59
(without/with gas ballast)
Admissible ambient temperatur °C +12 ... +40 +12 ... +40 +12 ... +40
Weight kg 26 32 68
Connections, intake and exhaust side DN 25 KF 25 KF 40 KF
1)
To DIN 28 400 and subsequent numbers
1.3 Supplied Equipment
The equipment supplied with the TRIVAC pump includes:
Pump with a motor,
Pump filled with brake fluid according to DOT-4,
1 centering ring,
1 centering ring with dirt trap,
2 clamping rings,
Operating Instructions,
Spare Parts List.
For protection, the connection ports are each blanked off by rubber dia-
phragms and supporting rings.
The part number 914 63-1 is delivered with the oil Ucon LB300-XY26.
Description
In the case of custom pumps please note the information provided in the
supplementary sheets.
NOTICE