3GA01208_002_C0 - 11/2016 - © Leybold
5 Maintenance 28
5.1 Maintenance Plan 29
5.2 Leybold Service 30
5.3 Monitoring the Oil Level 31
5.3.1 Checking the Condition of DOT-4 31
5.4 Oil Change 32
5.5 Cleaning the Inlet Screen 34
5.6 Removing and Fitting the Internal Demister 34
5.7 Disassembly and Reassembly of the Electric Motor 36
5.8 Replacing the Shaft Seal 37
5.9 Removing and Remounting the Pump Module 40
5.9.1 Removing the Pump Module 40
5.9.2 Remounting the Pump Module 41
6 Troubleshooting 42
7 Waste Disposal 44
EC Declaration of Conformity 45
Contents
Page
Original installation and operating instructions.