LIP-7024LD User Guide
１８
ï‚· Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:
ï‚· Press CALL BACK and hang-up.
To make a Voice Over announcement to a busy station:
ï‚· Dial #, after splash-tone, speak.
4.1.3 Leaving a Message Wait
If the called user does not answer or is in DND mode, you may leave a
Message Wait. The called user will receive a Message Wait indication;
the LED of the CALL BACK button will flash.
OPERATION
To activate Message Waiting:
ï‚· Press the CALL BACK button and hang-up.
4.2 External Calls
4.2.1 Placing external CO/VoIP calls
External calls are placed on CO/IP lines. These ‘lines’ are accessed
either by a button on the iPECS Phone assigned as a CO/IP line or by
dial codes. The CO/IP lines are grouped for different types of calls,
local, long distance, etc. Using the CO/IP line group code, you will be
able to access any line from the group. A Flex button on the iPECS
Phone assigned as a LOOP button lets you access a line from a group.
Dial codes for access to CO/IP lines are:
Individual CO/IP line access —
Individual CO/IP line Access Code Line No System
01-42 iPECS-50 & 100
001-200 iPECS-300
001-400 iPECS-600
88
001-600 iPECS-1200
01-80 iPECS-MG100 88
001-240 iPECS-MG300
CO/IP Group access—
CO/IP Group Access Code System
801 – 820 iPECS-50 & 100
801 – 872 iPECS-300 & 600
To Next Page
Loading...
Need help?
General
