To Next Page

To Previous Page

LIP-8012D & LIP-8024D User Guide

Speaker Mode(iPECS-Lik)/Speaker Hearing

Mode(iPECS-MG)—when the call is sent to the voice

mailbox, the caller’s voice is automatically broadcast

over the speaker of your iPECS Phone.

You may terminate screening, leaving the caller in voice

mail to record a message, talk with the caller and record

the conversation in the mailbox, or answer the call and

disconnect the Voicemail. The AME feature is only

available when using the iPECS VMIB Voice Mail; a

MUTE and AME button should be programmed (refer to

Appendix A User Program Codes).

3.4 Differential Ring Signals

When multiple phones in a small area ring, it can be

difficult to tell which are ringing. The iPECS Phone has

14 Ring Tones available for differentiating one phone’s

ringing from another. Four of the tones are stored in the

phone permanent memory; the remaining ten tones are

in the system memory. Four of these ten can be

downloaded into the phone memory for use as the 5

Ring Tone.

In iPECS-LIK

To download a Ring Tone from System memory:

 Press

TRANS/PGM,

 Dial 1 for Ring Tones,

 Dial 5 for Ring Tone download,

 Dial the phone’s memory location to receive the tone

(5-8),

 Dial 0-9 for the desired tone number; a confirmation

tone is heard,

 Press

HOLD/SAVE to download.

To select a Ring Tone from phone memory:

 Press the TRANS/PGM button,

 Dial 1 for Ring Tones,

 Dial 1 or 2 for Internal or External ring,

 Dial 1-8 for the desired tone number; a confirmation

tone is heard,

 Press HOLD/SAVE to make the selection.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: