To Next Page

To Previous Page

LIP-8040L User Guide

4.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800

System Speed Dial numbers (bins 200-999). The

iPECS-300 & 600 systems each have memory allocated

for 3000 System Speed Dial numbers (bins 2000-4999).

The iPECS-MG100 system has memory allocated for

1000 System Speed Dial numbers (bins 2000-2999).

The iPECS-MG300 system has memory allocated for

2000 System Speed Dial numbers (bins 2000-3999).

You may, if allowed, use System Speed Dial to call

frequently dialed numbers.

In some cases, these numbers are divided into groups

called System Speed Zone Groups. In this case, you

may access some numbers and not others and your

dialing restrictions may be invoked.

Only an Attendant can assign System Speed Dial

numbers.

4.3.4 Using and Entering Station Speed Dial Numbers

Each statio

n in the iPECS-100 System is allocated

memory for 20 Station Speed Dial numbers (bins 00-

19) each up to 48 digits. The iPECS-300 & 600 support

100 Station Speed Dial numbers (bins 000-099). The

iPECS-MG 100 & 300 each support 50 Station Speed

Dial numbers (bins 000-049). These numbers are

entered at the user’s station and may include several

‘special’ instructions. Special instructions and the

corresponding button are:

PAUSE will momentarily stop dialing.

FLASH as 1

digit—Activate dial tone detect.

To place a call using System Speed Dial:

 Lift the handset,

 Press the DIR Soft button,

 Press the speed button(iPECS-LIK)/Dial 2 for System

Speed(iPECS-MG),

 Dial the desired System Speed Dial bin number (200-

999 for iPECS-100 or 2000-4999 for iPECS-300 &

600) ,2000-2999 for iPECs-MG100 , or 2000-3999 for

iPECS-MG300).

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: