To Next Page

To Previous Page

LIP-8050V User Guide

If you are the Attendant or Secretary, you may activate

Intrusion. You may also use Step Call; dial the next station by

dialing the last digit of the Intercom number.

5.1.2 Leaving a Message Wait

If the called user does not answer or is in DND mode, you may

leave a Message Wait. The called user will receive a Message

Wait indication; the message icon will be displayed. If the

Ring/Message LED is set to Message Wait, the LED will flash.

5.2 External Calls

5.2.1

Placing external CO/VoIP calls

ternal calls are placed on CO/IP lines. These ‘lines’ are

accessed either using a button on the iPECS Phone assigned as

a CO/IP line or using dial codes. The CO/IP lines are grouped

for different types of calls, local, long distance, etc. Using the

CO/IP line group code, you will be able to access any line from

the group. A Flex button on the iPECS Phone assigned as a

LOOP

button lets you access a line from a group. Dial codes for

access to CO/IP lines are:

Individual CO/IP line access

To Camp-On (wait off-hook) for a busy station:

 Press * and await an answer.

To request a Callback (wait on-hook) for a busy station:

 Press the

ALL BACK

button and hang-up.

To make a Voice Over announcement to a busy station:

 Dial #,

 After the Splash tone is heard, begin speaking.

To activate Message Waiting:

 When calling a number that is busy or in DND mode, press the

CALL BACK

button and hang-up.

LG-Ericsson LDP-7008 D User Manual

Questions and Answers: