PREPARATION
14
n
Image shown may differ from your TV.
Fix the 4 screws securely using the holes in the
back of the TV.
4
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the parts of the Stand Body with
the Stand Base of the TV.
Assemble the TV as shown.
1
2
3
INSTALLATION
►When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the product
installation). Do not over tighten.
NOTE
DETACHMENT
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Remove the screws from the TV.
2
Detach the stand from TV.
3
STAND BODY
STAND BASE
16 mm
20 mm
For 42/47SL90QR
To Next Page
Loading...
