17
Carefully place the TV screen side down on a cush-
ioned surface to protect the screen from damage.
Fix the 3 Bolts securely using the holes in the
Cover Base.
Assemble the parts of the Stand Rear Body
with the TV.
Assemble the parts of the Cap with the Stand
Rear Body of the TV.
INSTALLATION
Stand Rear Body
Cover Base
Stand Rear Body
Cap
Carefully place the TV screen side down on a cush-
ioned surface to protect the screen from damage.
Detach the Cap from TV.
Press in the direction of the arrow to detach the
cap.
Loose the Screws and then detach the Stand
Rear Body from TV.
Loose the Bolts and then detach the Cover
Base from TV.
Cap
DETACHMENT
Stand Rear Body
Cover Base
Loose the Screws and then detach the Stand
Body from TV.
Stand Body
For 22LU40R
n
Image shown may differ from your TV.
►When assembling the desk type stand, make sure
the bolt is fully tightened (If not tightened fully,
the TV can tilt forward after the product installa-
tion). Do not over tighten.
NOTE
1
2
3
4
1
2
3
4
5
To Next Page
Loading...
