19
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the parts of the STAND BODY with
COVER BASE of the TV by using the 4 screws
supplied.
Fix the 4 screws securely using the holes in the
back of the TV.
1
2
Assemble the TV as shown.
3
4
►When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the product
installation). Do not over tighten.
NOTE
COVER BASE
STAND BODY
(M4x20)
(M4x20)
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Remove the screws from the TV.
2
Detach the stand from TV.
3
After removing the stand, install the included
protection cover over the hole for the stand.
Press the PROTECTION COVER into the TV until
you hear it click.
PROTECTION COVER
INSTALLATION DETACHMENT
For 26/32LD330, 32LD340, 26/32LD331C, 26LD330C
n
Image shown may differ from your TV.
To Next Page
Loading...
