WATCHING TV
28
WATCHING TV
TURNING ON THE TV
NOTE
► If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
►If you do not complete the Initial setting, the it will appear whenever the TV is switched on until
the Initial setting procedure is completed.
►If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock
function.
First, connect power cord correctly and switch the AC power control switch on TV. (Except 22/26/32LD330,
32/42LD420, 32LD340, 26/32LD331C, 22/26LD330C) At this moment, the TV switches to standby mode.
n
In standby mode to turn TV on, press the
, INPUT, CH
(
▲ ▼
or ∧∨) button on the TV or press the
POWER, INPUT, TV, CH(∧ or ∨), Number (0~9) button on the remote control.
Select the viewing source by using the INPUT button on the remote control.
n
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby
mode.
1
2
3
When the TV can't be turned on
with the remote control, press the
main power switch on the TV.
Except 22/26/32LD330, 19/22LH20R, 32/42LD420, 32LD340,
26/32LD331C, 22/26LD330C
MAIN POWER
SWITCH
(BOTTOM OR BACK)
To Next Page
Loading...
