LGE Internal Use OnlyCopyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. Module General Specification
1. Application range
This specification is applied to the LCD TV used LD91M
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage (100-240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC/EN60065
- EMC:CE, IEC
No Item Specification Remark
1 Screen Device 22” wide color display module LCD
2 Aspect Ratio 16:10
3 LCD Module 22” TFT LCD HD CMO
4 Storage Environment Temp. : -20 ~ 60 deg
Humidity : 10 ~ 90 %
5 Input Voltage AC100-240V~, 50/60Hz
6 Power Consumption LCD(Module) + Backlight(Lamp)
7 Module Size 493.7(H) x 320.1(V) x 16.5(D)
8 Pixel Pitch 0.282(H) x 0.282(V)
9 Back Light 4 CCFL
10 Display Colors 1.06Billion(FHD LGD),16.7M (others)
11 Coating 3H, AG
To Next Page
Loading...
