20
ENG
ENGLISH
CUSTOMIZING SETTINGS
Activating the Main Menu
1
Press the Menu ( ) button.
2
Use the , , , buttons to adjust the options.
3
Press the Menu ( ) button to exit the OSD menu.
Button Description
Menu ( )
If the menu is inactive Activates the main menu.
If the menu is active Exits the OSD menu when the button is pressed.
If the menu is inactive Adjusts the volume level of the monitor.
If the menu is active Left directional key.
If the menu is inactive Adjusts the volume level of the monitor.
If the menu is active Right directional key.
If the menu is inactive Enters the Accessibility menu.
If the menu is active Up directional key.
If the menu is inactive Enters the Accessibility menu.
If the menu is active Down directional key.
INPUT
Sets input mode. You can operate the change of input sig nals.
• When two input signals over are connected and press input key, input signal(D-SUB/DVI/HDMI/DP)will be
changed sequentially.
• When only one signal is connected, it is automatically detected. The default setting is D-SUB.
(Power Button)
Powers on or off.
Power Indicator When the monitor is in operating mode, the power indicator will turn white (on mode).
Menu > Quick Settings Description
Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Ratio Adjusts the screen ratio.
Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays a video according to the input video signal aspect ratio.
SMART ENERGY
SAVING
High Enables SMART ENERGY SAVING you can save energy with this energy-
high efficient function.
Low Enables SMART ENERGY SAVING you can save energy with this energy-
low efficient function.
Off Disables SMART ENERGY SAVING .
NOTE
y
The ratio is disabled in the interlaced signal.
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor. If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become
lower or higher depend on source.
* SMART ENERGY SAVING :
Conserve energy by using luminance compensation algorithm.
Customizing settings
Monitor buttons
To Next Page
Loading...
